CANAM ENGINE BUILDS WE ONLY SHIP ENGINES TO USA LOWER 48!!
CALL OR MESSAGE BEFORE ORDERING ANY BIG BORE BUILD TO CHECK STOCK!
IT IS REQUIRED THAT ALL ENGINES BE PROFESSIONALLY INSTALLED FOR YOUR WARRANTY TO BE VALID. NO EXCEPTIONS! THIS ENSURES THAT THE PROPER MEASURES ARE TAKEN AND CORRECT FLUIDS PUT IN THE ENGINE.
WE ONLY SHIP ENGINES INSIDE THE USA TO LOWER 48!!!!!!
ENGINE WARRANTY EFFECTIVE 7-7-2025 (went to 100 day from 90)
******AFTERMARKET CRANK ENGINES WILL NOT BE WARRANTIED******
OUR FULL ENGINE BUILDS HAVE A 100 DAY WARRANTY FROM THE DATE IT IS DELIVERED TO YOU. THIS WARRANTY IS ONLY VALID IF THE ENGINE IS PROFESSIONALLY INSTALLED AND MUST HAVE PROOF OF THIS WITH A DETAILED INVOICE/RECEIPT ***(NO EXCEPTIONS!)***. SHIPPING IS NOT COVERED NOR IS LABOR ON YOUR END WE WARRANTY THE ENGINE ITSELF NOTHING ELSE. WARRANTY DOES *NOT* COVER FORCED INDUCTION BUILDS INCLUDING NITROUS, TURBO (unless stock build is turbo) OR SUPERCHARGER BUILDS. WARRANTY DOES NOT COVER OIL STARVATION OR OVERHEATING, WATER, MUD/SAND INGESTION IS NOT COVERED NOR IS DETONATION FROM POOR TUNING. IF THE ENGINE HAS BEEN TAKEN APART PRIOR TO US RECEIVING IT THEN WARRANTY IS VOID. Engines may or may not come with exhaust head and gearbox studs. We don't install nor remove them from cores. If you buy an engine from your dealer it will show up with no studs as well.
**SHIP CORES BACK TO THE FOLLOWING ADDRESS**
HIGH TECH POWERSPORTS
3355 NORTH MAIN STREET
MADISONVILLE, KY 42431
- 10
- 15
- 20
- 25
- 30
- 50
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
CANAM VTWIN GEN 2 CRANKCASE (BIG BLOCK)Replacement bare cases for Canam big block vtwin. These can be used from 500cc-1000cc (⚠️EXCEPT OEM 850 CYLINDERS, THEY WILL NOT SLIDE INTO THIS CASE⚠️) WILL REQUIRE THE OIL COOLER THOUGH. THEY ALSO HAVE HOLES FOR PISTON OILERS WHICH CAN BE BLOCKED OFF WITH...
- $569.99
- $569.99
- Unit price
- / per
-
OG MAVERICK "TURBO" REBUILD SERVICEWe will rebuild your STOCK turbo from a 2015-2017 maverick turbo with a completely new heart... Only the original generation maverick turbos NOT the X3. Fully balanced and will 100% meet brp factory spec. This does require you to ship your turbo to us.
- $599.00
- $599.00
- Unit price
- / per
-
OG MAVERICK TURBO DIY REBUILD NEW CHRANew og mav turbo heart (CHRA). No core required and brand new for the DIY guys. Or we offer the rebuild service in house in another listing. This only fits og mav turbos 2015-2017. Nothing else. Comes with what you see balanced and install...
- $349.00
- $349.00
- Unit price
- / per
-
OEM CANAM MAVERICK HEADS ( USED SET)These are oem heads. We have vapor honed and cleaned them the best we can and they have KIBBLEWHITE valve seals in them. Also valves and hardware are oem. NO CAMS.
- $500.00
- $500.00
- Unit price
- / per
-
CANAM VTWIN STAINLESS BOLT KITThis is for riders who acid wash their engines or just don't like the rusted look of their bolts when the zinc coating comes off. This kit has the bolts to do all OUTSIDE engine case bolts excluding valve covers. (no brackets or internal...
- $59.99
- $59.99
- Unit price
- / per
-
Can-Am Spin-On Oil Filter Adapter | ATV & SxSImportant: This adapter installs in the stock oil-filter location only. It is not a relocation kit.Upgrade the factory Can-Am filter setup to a common automotive-style spin-on oil filter that can be sourced from most auto-parts stores.FitmentDesigned for Can-Am V-twin applications using the standard Can-Am-style...
- From $137.00
- From $137.00
- Unit price
- / per
-
BILLET SOLID MOTOR MOUNTS1) Kit replaces all stock rubber motor mounts. 2) Stops drive shaft wear due to motor twisting 3) A must for all high horse power motors. 4) Fits 500/650/800/1000cc. Will be black or finished aluminum color. ALL CANAM VTWINS
- $99.99
- $99.99
- Unit price
- / per
-
OMC Canam renegade /outlander airbox gasket. 2013-2024 (IN STOCK NO DROP SHIP)Make sure your airbox is leak proof with the legendary OMC airbox gaskets. Fits all canam Atvs 2013-24..
- $29.00
- $29.00
- Unit price
- / per
-
CANAM OIL FILTERThese will fit all canam vtwins and x3s, defender mav sport and trail. These also DO have the pressure relief in the end to allow oil to keep flowing if the filter paper were to clog.
- $6.99
- $6.99
- Unit price
- / per
-
800/1000 injector set (2)800r/850/1000ho injectors for canam vtwin.
- $139.99
- $139.99
- Unit price
- / per
-
CANAM VTWIN BILLET CHAIN TENSIONERS (SET OF 2)These replace the stock plastic tensioners. Comes in a set of 2 with o rings.
- $59.99
- $59.99
- Unit price
- / per
-
CANAM VTWIN ENGINE/GEARBOX MOUNT (1)These replace your stock engine and gearbox Mounts. Sold as a SINGLE
- $15.96
- $15.96
- Unit price
- / per
-
CANAM VTWIN STARTERThis is a replacement starter for ALL canam vtwin engines.. Does not matter if it's a sxs or atv, g1 or g2. If it has a vtwin this starter fits it. This a replacement part not oem. Also comes with a new nut on...
- $98.77
- $98.77
- Unit price
- / per
-
CANAM VTWIN BILLET MAG COVER PLUGMade from billet aluminum. Fits all the Canam vtwin engines. No o ring is included. Reuse stock.
- $25.00
- $25.00
- Unit price
- / per
-
800 CYLINDER CORE FEEFULLY REFUNDABLE AFTER WE RECEIVE YOUR CORES.
- $100.00
- $100.00
- Unit price
- / per
-
COOLANT VACUUM PUMPFull your engine with coolant every time.. No more cracking bleeders, jacking the front end up and chasing air pockets. Air cannot exist in vacuum. These are flawless every time.
- $46.44
- $46.44
- Unit price
- / per
-
CANAM/ROTAX 1000CC BOSCH INJECTORS W/ ADAPTERS (E85 SAFE) (1)1000cc Bosch injectors with adapters. E85 safe and fit all canam rotax vtwins and x3. These would be for big power only. Each injector can support around 200hp@51psi. Price is per 1 INJECTOR WITH 1 ADAPTER
- $149.99
- $149.99
- Unit price
- / per
-
HTP FORGED 1000 VTWIN RODS (2 rods)Forged rods can handle 200whp each. Come with arp rod bolts. H BEAM STYLE. THESE ARE BOTTOM LOAD RODS MEANING THE BOLT SCREWS INTO THE ROD FROM THE BOTTOM. ROD BOLT TORQUE IS 55nM-OR-40.5FT LBS
- $550.00
- $550.00
- Unit price
- / per
-
CANAM VTWIN TEMPERATURE SENSORThese fit ALL canam models that have a vtwin engine. Again ALL models. Atv/SXS is irrelevant. If it has a vtwin then this is the temp sensor needed. This sensor is the one that screws into the top of the rear head.
- $22.23
- $22.23
- Unit price
- / per
-
CANAM/ROTAX 550CC BOSCH INJECTORS WITH ADAPTERS (E85 SAFE)(1)550cc Bosch injectors with adapters. E85 safe and fit all canam rotax vtwins and x3. Proce is per 1 INJECTOR WITH 1 ADAPTER
- $119.99
- $119.99
- Unit price
- / per






