CANAM ENGINE BUILDS WE ONLY SHIP ENGINES TO USA LOWER 48!!
CALL OR MESSAGE BEFORE ORDERING ANY BIG BORE BUILD TO CHECK STOCK!
IT IS REQUIRED THAT ALL ENGINES BE PROFESSIONALLY INSTALLED FOR YOUR WARRANTY TO BE VALID. NO EXCEPTIONS! THIS ENSURES THAT THE PROPER MEASURES ARE TAKEN AND CORRECT FLUIDS PUT IN THE ENGINE.
WE ONLY SHIP ENGINES INSIDE THE USA TO LOWER 48!!!!!!
ENGINE WARRANTY EFFECTIVE 7-7-2025 (went to 100 day from 90)
******AFTERMARKET CRANK ENGINES WILL NOT BE WARRANTIED******
OUR FULL ENGINE BUILDS HAVE A 100 DAY WARRANTY FROM THE DATE IT IS DELIVERED TO YOU. THIS WARRANTY IS ONLY VALID IF THE ENGINE IS PROFESSIONALLY INSTALLED AND MUST HAVE PROOF OF THIS WITH A DETAILED INVOICE/RECEIPT ***(NO EXCEPTIONS!)***. SHIPPING IS NOT COVERED NOR IS LABOR ON YOUR END WE WARRANTY THE ENGINE ITSELF NOTHING ELSE. WARRANTY DOES *NOT* COVER FORCED INDUCTION BUILDS INCLUDING NITROUS, TURBO (unless stock build is turbo) OR SUPERCHARGER BUILDS. WARRANTY DOES NOT COVER OIL STARVATION OR OVERHEATING, WATER, MUD/SAND INGESTION IS NOT COVERED NOR IS DETONATION FROM POOR TUNING. IF THE ENGINE HAS BEEN TAKEN APART PRIOR TO US RECEIVING IT THEN WARRANTY IS VOID. Engines may or may not come with exhaust head and gearbox studs. We don't install nor remove them from cores. If you buy an engine from your dealer it will show up with no studs as well.
**SHIP CORES BACK TO THE FOLLOWING ADDRESS**
HIGH TECH POWERSPORTS
3355 NORTH MAIN STREET
MADISONVILLE, KY 42431
- 10
- 15
- 20
- 25
- 30
- 50
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
CANAM/ROTAX 1000CC BOSCH INJECTORS W/ ADAPTERS (E85 SAFE) (1)1000cc Bosch injectors with adapters. E85 safe and fit all canam rotax vtwins and x3. These would be for big power only. Each injector can support around 200hp@51psi. Price is per 1 INJECTOR WITH 1 ADAPTER
- $149.99
- $149.99
- Unit price
- / per
-
MRRPM 1040 BIG BORE ENGINECORE INFO >> If you do not have a good rebuildable core (cases must be good) What we send you in your build is what needs to be sent back with your core minus a bad crank. IF YOU PURCHASE AN ENGINE BUILD YOU...
- From $2,888.00
- From $2,888.00
- Unit price
- / per
-
OG MAVERICK "TURBO" REBUILD SERVICEWe will rebuild your STOCK turbo from a 2015-2017 maverick turbo with a completely new heart... Only the original generation maverick turbos NOT the X3. Fully balanced and will 100% meet brp factory spec. This does require you to ship your turbo to us.
- $599.00
- $599.00
- Unit price
- / per
-
HTP FORGED 1000 VTWIN RODS (2 rods)Forged rods can handle 200whp each. Come with arp rod bolts. H BEAM STYLE. THESE ARE BOTTOM LOAD RODS MEANING THE BOLT SCREWS INTO THE ROD FROM THE BOTTOM. ROD BOLT TORQUE IS 55nM-OR-40.5FT LBS
- $550.00
- $550.00
- Unit price
- / per
-
CANAM/ROTAX 550CC BOSCH INJECTORS WITH ADAPTERS (E85 SAFE)(1)550cc Bosch injectors with adapters. E85 safe and fit all canam rotax vtwins and x3. Proce is per 1 INJECTOR WITH 1 ADAPTER
- $119.99
- $119.99
- Unit price
- / per
-
THE BOM 1020 BIG BORE ENGINETHIS KIT USES FORGED CP PISTONS AND DOES REQUIRE CYLINDER CORES.. IF USING NITROUS WE NEED TO KNOW FOR RING FILING PURPOSES AND CLEARANCES. CORE INFO >> If you do not have a good rebuildable core (cases must be good). What we send...
- From $2,700.00
- From $2,700.00
- Unit price
- / per
-
CANAM 800CC COMPLETE REBUILD KIT (🛑 read description leave model info🛑)🔥 PICTURE IS JUST A GENERIC REPRESENTATION OF A COMPLETE KIT. YOU WILL RECEIVE THE CORRECT KIT BASED ON THE MODEL INFO YOU LEAVE. 🔥 This kit is to fit the following, all 800cc CANAM ATVS/SXS (Gen 1 OR 2) PAY ATTENTION TO...
- From $920.00
- From $920.00
- Unit price
- / per
-
CANAM VTWIN POLY MOTOR MOUNT KITThese are poly to absorb vibration. Comes with the 2 lower mounts for engine, 1 upper mount and the 2 mounts for the gearbox. This fits all the G1 and G2 atvs and og mavs and commanders.
- $92.99
- $92.99
- Unit price
- / per
-
OEM CANAM MAVERICK HEADS ( USED SET)These are oem heads. We have vapor honed and cleaned them the best we can and they have KIBBLEWHITE valve seals in them. Also valves and hardware are oem. NO CAMS.
- $500.00
- $500.00
- Unit price
- / per
-
CANAM VTWIN TEMPERATURE SENSORThese fit ALL canam models that have a vtwin engine. Again ALL models. Atv/SXS is irrelevant. If it has a vtwin then this is the temp sensor needed. This sensor is the one that screws into the top of the rear head.
- $22.23
- $22.23
- Unit price
- / per
-
CANAM TITANIUM 1000 HEAD STUDSHalf the weight of chromoly. Stronger tensile strength.. For that big hp 💪 These are for 1000cc only and have an Allen drive on them.
- $169.99
- $169.99
- Unit price
- / per
-
CANAM VTWIN HEAVY DUTY STARTER (12V)These starters have 4 brushes instead of the 2 brush factory atv starters . Also has a roller bearing for the armature where the factory has a bushing . If installing in a big gearbox machine , you will have to separate the engine...
- $595.00
- $595.00
- Unit price
- / per
-
ENGINE LEAK DOWN TEST KIT.This kit is to test your engines top end to try to pin point compression loss. For example, head gasket, valves, etc. Comes with 12mm, 10mm and 14mm adapters that will fit Canam and Polaris.
- $44.99
- $44.99
- Unit price
- / per
-
ENGINE COMPRESSION TEST KIT WITH CASEThis kit will test your engines compression to let you know if you have top end issues. Adapters for many different spark plug types including Canam and Polaris.
- $49.99
- $49.99
- Unit price
- / per
-
1000 CYLINDER CORE FEEFULLY REFUNDABLE AFTER WE RECEIVE YOUR CORES.
- $100.00
- $100.00
- Unit price
- / per
-
MRRPM 1105 OR 1180 BIG BORE ENGINETHIS KIT USES FORGED CP PISTONS. IF USING NITROUS WE NEED TO KNOW FOR RING FILING PURPOSES AND CLEARANCES. CORE INFO >> If you do not have a good rebuildable core (cases must be good). What we send you in your build is...
- From $4,250.00
- From $4,250.00
- Unit price
- / per
-
MRRPM 1018 BIG BORE ENGINETHIS KIT USES FORGED CP PISTONS. IF USING NITROUS WE NEED TO KNOW FOR RING FILING PURPOSES AND CLEARANCES. CORE INFO >> If you do not have a good rebuildable core (cases must be good). What we send you in your build is...
- From $2,940.00
- From $2,940.00
- Unit price
- / per
-
CANAM VTWIN MAGNETIC OIL DRAIN PLUGReplaces the larger drain plug (see pics). No crush washer needs. Uses Allen head and has built in o ring and magnet. No crush washer needed.
- $11.99
- $11.99
- Unit price
- / per
-
2015-17 CANAM MAVERICK TURBO (USED TURBO CHARGER)This fits all factory Canam maverick turbo models from 2015 - 2017. Came off of a running machine. Comes with what is pictured I clouding solenoid, hoses, hot and cold side. WE CAN REPLACETHE HEART OF THE TURBO (CHRA) WITH A NEW OEM...
- $1,099.00
- $1,099.00
- Unit price
- / per
-
HTP CANAM 1000 VTWIN FORGED CONNECTING RODS.These forged rods can handle 200whp each and also come with arp 2000 bolts for each rod. H beam style. Only sold as a set. ONLY FITS 1000 MODELS. These are top load also meaning the bolt screws into the rod from the top...
- $550.00
- $550.00
- Unit price
- / per










