CANAM ENGINE PERFORMANCE

650/800 G2 RACE CAMSREQUIRES MODIFIED VALVE GUIDES OR SEALSLOWERING VALVE GUIDES $25 SEALS $80 PER SET (8)Three Bolt    *comes with larger flange bolts to help slippage *   LASH. .016I/.016E

These are oem heads. We have vapor honed and cleaned them the best we can and they have KIBBLEWHITE valve seals in them. Also valves and hardware are oem. NO CAMS. 

MUST SEND YOUR HEADS... THIS DOES NOT COME WITH HEADS!  FOR CANAM VTWINS ONLY.   FULL CNC PORTING HEAD WORK. They come with short custom guides and lighter valves. They need an Aluim intake to be port matched to seal them. To port match...

100% bolt-on kit requiring no additional machining. This kit can be installed with the motor still in the frame and uses your stock heads. Head work and cams are available. Our 1040cc Turbo kits can be installed on Can-am ATV 1000cc Turbo Mavericks. Fuel/Air...

These already have the chain tensioner hole and cam sensor hole drilled in them. 104cc intake ports and 78cc exhaust ports where stock heads are 89cc intake and 63cc exhaust. Thicker water jacket for less chance of a grind thru on port and polish....

Fits all CANAM ATV 800ho models 2008 and prior. These are single bolt cams and come as a set of 2.  Part 420620023 FRONT  Part 420620016 REAR 

These are replacement maverick cams used in all og Mavericks from 2014 forward and some atvs and other applications. These are new. Comes as a full set to do 1 engine. These are 3 bolt cams.  Part 420637440 or 420281940 FRONT  Part 420637442 or...

These are used oem mav heads that have been cnc p&p. They will come assembled with stock valves and springs with new kibblewhite valve seals.  NO cams.  NO cores required. 

These forged rods can handle 200whp each and also come with arp 2000 bolts for each rod. H beam style. Only sold as a set. ONLY FITS 1000 MODELS. These are top load also meaning the bolt screws into the rod from the top...

DESIGNED FOR MAJOR POWER FROM VTWINS OR THOSE WHO JUST LIKE PERFECTION. THESE DO NOT FLEX LIKE THE STOCK CASE UNDER MAJOR POWER. THESE CAN ALSO BE WELDED RE MACHINED ECT.  *these are made to order 

650/800 G1 RACE CAMSREQUIRES MODIFIED VALVE GUIDES OR SEALSLOWERING VALVE GUIDES $25 SEALS $80 PER SET (8)Single Bolt *comes with larger flange bolts to help slippage *

These use OEM jugs and cp pistons and can be used with power adders.  Comes with head and base gaskets! OEM CORES ARE REQUIRED! YOU WILL NEED TO ADD THE CYLINDER CORE TO THE CART UNLESS YOU SEND YOUR CYLINDERS FIRST. BASE ENGINE 500CC-640BBK...

These already have the tensioner hole in them. 104cc intake ports and 78cc exhaust ports where stock heads are 89cc intake and 63cc exhaust. Thicker water jacket for less chance of a grind thru on port and polish. Set includes everything except cams. Sold...

1. A356 T-6 aluminum casting, for durability. 2. Approx 1/2" (12mm) wall thickness for full porting without worry of cracking and grinding through. 3. 100% CNC machined for accuracy, in house at MRRPM cycle. 4. Comes CNC port matched, to allow more accurate port...

Generally used for race cams but can be used for others as well to prevent valve float for high revving engines. These do still use the stock keepers. Very lightweight and high quality from kibblewhite. Comes with (8) enough for 2 mav heads. 

100% ATV bolt-on kit requiring no additional machining. This kit can be installed with the engine still in the frame and uses your stock heads. Head work and cams are available. This kit is a perfect option for top end rebuilds or a low...

Forged rods can handle 200whp each. Come with arp rod bolts. H BEAM STYLE. THESE ARE BOTTOM LOAD RODS MEANING THE BOLT SCREWS INTO THE ROD FROM THE BOTTOM.  ROD BOLT TORQUE IS 55nM-OR-40.5FT LBS

These bolts are for your stock primary and secondary. These are the strongest grade metric bolts available. Time to toss those junk studs. These are also a direct swap and can be reused multiple times. Primary bolt fits stm rage 3 series also.  Fitment...

These already have the chain tensioner hole in them. Sold as a set.   THESE USE MAVERICK SPARK PLUGS! 

These will fit all canam vtwins and x3s, defender mav sport and trail. These also DO have the pressure relief in the end to allow oil to keep flowing if the filter paper were to clog.